Comments for Go Fast Adventure

Comment on Mazdaspeed3 Mazdaspeed Coilover Impression by corey g

corey g — Mon, 21 Jun 2010 00:54:45 +0000

nice writeup. I recently inherited a MS3 coilover kit for, but it’s missing parts. I was wondering if you still have the stock axial bearings and if they are for sale. Any help would be great(also missing are the rear spring perch’s). Thank you very much.

Comment on Mazdaspeed3 Racing Seat/Harness Install Write Up by AfterMarket Seats for 2010 Mazda 3 - 2010 Mazda 3/Mazdaspeed 3 Forums

AfterMarket Seats for 2010 Mazda 3 - 2010 Mazda 3/Mazdaspeed 3 Forums — Thu, 04 Feb 2010 18:02:06 +0000

[...] WIDE (which I like even more). I did find some detail on a guy who added SPARCO seats to his 3 … Go Fast Adventure Mazdaspeed3 Racing Seat/Harness Install Write Up Corbeau TRS Seat Installed Corbeau TRS Wide and LG1 [...]

Comment on Time for a break by Ed

Ed — Tue, 15 Dec 2009 05:47:26 +0000

Hello, just curious when you’re coming back. Was curious about some other things too related to your car.

Comment on Mazdaspeed3 Mazdaspeed Coilover Impression by Randy

Randy — Sat, 14 Nov 2009 22:59:29 +0000

Eric, set your front rideheight so that when the car is sitting on the ground, the front lower control arm is parallel with the ground. Front camber maxed out at -2.5 on mine, but I would like more ! I didn’t get the camber adjusting arm for the rear because it wasn’t allowed in the rules for my class.

Comment on Mazdaspeed3 Mazdaspeed Coilover Impression by Randy

Randy — Sat, 14 Nov 2009 22:57:55 +0000

Steve, I don’t remember the setting off the top of my head, but if you look in the Mazdaspeed manual, they have all the reference damping settings.

Comment on Mazdaspeed3 Mazdaspeed Coilover Impression by Steve

Steve — Sat, 14 Nov 2009 20:25:10 +0000

Great review, ended up purchasing the Mazdaspeed3 coilovers myself for street use. What compression and rebound settings did you find best for steet use?

Comment on 1st race of 2009, set fastest time in class then crashes the car by kevin

kevin — Wed, 02 Sep 2009 09:11:53 +0000

I drove my mazdaspeed3 and slided out at the same place as you last year. My car was stuck in the sand and had to be towed out. I also want to get K-MAC and put in on my mazdaspeed coilover .However, I am not sure where to make your custom adaptor because I am come back to my country -Taiwan.

Comment on Time for a break by Fred

Fred — Mon, 31 Aug 2009 05:15:13 +0000

@Martin:

As per one of his older posts, they are 17×8 +48 Enkei RC-T4 Tarmac.

Comment on Time for a break by Martin

Martin — Thu, 13 Aug 2009 03:52:03 +0000

Heya Randy, sorry to hear about the crash… Quick question, what wheels are the white ones in your pictures? Price and weight available? Thanks!

Comment on 1st race of 2009, set fastest time in class then crashes the car by Joe

Joe — Fri, 19 Jun 2009 18:56:30 +0000

Sorry to hear this. I was most appreciative of your write up on installing the harness bar. Hope it works out in the end. Also glad your ok and live to race another day.